After months of planning, you finally have all of the details organized for your upcoming party, including the purchase of quality and bargain balloons. However, with such a large order, you now feel stressed about getting the balloons inflated. Especially if you have little time to get the decorations up, the task may seem monumental. Fortunately, you can get the decorations in place much quicker and easier by using a balloon inflator.
Even if you have a small number of balloons to fill with air, a balloon inflator machine will make all the difference in the world. The following are just a few examples of the benefits associated with using an electric balloon inflator.
Save Time – Blowing balloons up manually takes a lot of time, which you could use for other aspects of the party. Obviously, the larger the order, the more time inflation will take. You also need to consider that some balloons do not stay inflated as long as others. While you could inflate Mylar balloons days or perhaps weeks ahead of time because of the helium, you need to wait to inflate latex balloons with air shortly before your party starts. That means you have little time to get the job done, only stressing you out further.
Prevent a Painful Mouth – Even if you have several friends helping, blowing balloons up using your mouth becomes painful. In fact, if you have any type of allergy to latex, you could end up with mouth sores. The bottom line is that manual inflation would wreak havoc on your mouth.
Different Focus – Instead of spending your time before the party blowing up balloons, using a balloon inflator machine gives you the opportunity to focus on other things. As an example, you would have additional time to spend on other decorations, food and drink planning, and so on. In fact, if you purchased balloons for a wedding reception and are a part of the bridal party, you probably have a lot of other things to accomplish. Instead of blowing up balloons, you could relax at the bachelorette party and rehearsal dinner.
Enhanced Aesthetics – Something else to consider is that by inflating balloons manually, you end up with different shapes and sizes. While not a huge concern, if you want the decorations to have a consistent look, then a balloon pump is the ideal solution.
Easy way to inflate latex balloons
Balloons have incredible magic to give a festive mood. This is the best decoration or gift to cheer up and create a cheerful atmosphere.
Balloons can be inflated in the "traditional" way or using pumps. Take a more detailed look at the options.
Inflate Balloons With a Balloon Air Compressor
How to inflate balloons easily? Use air compressor to blow up balloons! The pump must be equipped with a special spout or nozzle (tube adapter). It is problematic to inflate a large number of balloons with a pump – the process will take a lot of time. Use a compressor. Install a suitable nozzle on the working nozzle of the compressor and firmly put the tail of the ball on it. Turn on the equipment, and after filling the balloon with air, clamp the hole and use the sealer. If there is no such machine, you can use a hot iron. So, can you use an air compressor to blow up balloons? The answer is positive.
Inflate Balloons With an Electric Pump
How to use electric balloon inflator? If there is an electric pump at hand, then it is necessary to inflate the products very carefully in order to prevent the figure from blowing and tearing. So, in order to inflate the product with a pump, you need to insert a connecting tube or hose into the ball valve and fill it with air to the required degree. Then we close or solder the valve and tie the tail with twine, string, or ribbon. Large balloons and figures may have self-sealing flaps that need to be sealed, and then the tail should be tied into several knots for reliability. All in all, it is not too difficult to use electric balloon inflator.
Inflate Balloons With a Hand Pump
How to use balloon inflator? Most shops selling holiday ammunition will offer you inexpensive pumps. They are made of impact-resistant plastic; the moving parts are lubricated with silicone grease, so you should not worry about the durability and reliability of the pump. It's not hard to use those:
- the tip of the pump is tapered. It is easy to put on a latex or foil balloon of any shape and size. The existing ribs do not allow even an inflatable figure to slide off;
- since the pump is manual and two-way, it must be pulled back with your free hand and returned back. Air will flow through the existing suction valves in both forward and reverse motion. With one hand, the ball must be held; it is not required to stretch it beforehand.
The hand pumps have a volume of approximately 0.2 liters and are suitable for filling small batches of round balloons, hearts, foil figures, and modeling balloons. If you need to fill a lot of large balloons with air, it is better to use a special electric compressor. The pump, of course, will cope with such a load, but much more time and effort will have to be spent. Do you use a balloon pump inflator? If you can do it, you are lucky: it is an easy way to get lots of balloons ready quickly.
Which inflators are better to use?
What is the best way to inflate balloons? Before you use a balloon inflator, take a look.
For latex balloons
So how do you properly inflate a latex balloon with helium? A helium balloon (or any pump) can be used to fill the product with gas. The main thing in this matter is not to rush. Put the tail of the product on the cylinder opening or on the adapter, and then slowly turn the valve so that the ball does not burst from a sudden pressure drop. Remember that balloons cannot be inflated to a size larger than indicated on the label.
For foil balloons
Helium is one of the most suitable gases to fill a balloon. It allows the product to fly since it has a lower density than air.
Inflating foil balloons at home is not so easy. To do this, you need a helium tank and a hose with an adapter. As a rule, such devices are not kept in ordinary apartments without a special purpose, so you can rent equipment. It will be cheaper than buying it for personal use.
To inflate a balloon with helium, you need to place a hole in the adapter and secure it carefully with a clamp. After the decoration is filled with gas to the desired volume, it is necessary to remove it from the adapter and close the valve, and then tie it with a braid. If you want to use the balloon pump, it will be pretty difficult, but still possible.
If you don't want to complicate your life, it's better to contact a special service that creates decorations from balloons or sells them.
How do you pump balloons fast?
Understandably, you can try different methods of baloons inflation, but the quickest and easiest one is to use pumps. Use balloon air pump to quickly get your products ready: you will definitely like it! Choosing a reliable balloon company is even better option: in this case, professionals will do all the work for you.
How to inflate a lot of balloons
If you need to inflate a large number of balloons and want to get the perfect result - flying accessories floating in the air, we recommend that you turn to the traditional methods of filling balloons. The first option is to contact a specialized company that organizes holidays or sells balloons. Professionals know exactly how to quickly and efficiently inflate balloons using helium. The advantage of this approach to the purchase of balls is a wide range of company offers. Specialists will do all the work and bring the balloons exactly at the appointed time, arranging a real surprise for the recipient
Another traditional way to inflate balloons with helium at home is to rent or buy a gas cylinder. This approach will save money - inflating balloons on your own is cheaper than the services of professionals. But there are a few downsides to this solution:
- you cannot be sure of the quality of helium – purchase those only from trusted suppliers;
- even the large size of the gas cylinder will not allow you to inflate a lot of balloons - you will have to purchase several balloons;
- the cost of the gas cylinder is quite high and pays off only by inflating a very large number of balloons.
How many balloons can be inflated with one gas cylinder? The 40-liter gas cylinder will allow you to fill up to 800 standard-sized balloons. A 10-liter one will be relevant for filling 15–160 balloons, depending on their size.
How to inflate helium balloons with a gas cylinder? Insert the cylinder tube into the inflation hole and press the button to release the gas. Tie a ponytail tightly after filling the balloon. You can attach the balls to the surfaces for decoration using tape or ribbons.
Where to get an electric balloon inflator
At Balloons.Online, not only do we offer an incredible selection of superior quality balloons and accessories but also inflators to make planning your next party balloon decorations more enjoyable.
